Steel snow plow
cutting edges.
High-carbon replacement cutting edges for the working fleet. We cut and punch steel in-house in Oneonta, New York, supplying dealers, distributors, highway departments, and commercial snow removal operations.
Replacement edges for real-world plow work.
From individual replacement blades to repeat dealer orders, we produce steel edges to the dimensions and mounting layout specified for the job.
Steel cutting edges
Straight replacement blades made from 1084 high-carbon steel, with common sizes and mounting configurations for commercial plows.
Highway cutting edges
Long-length cutting edges with highway-style punching for municipal trucks, highway departments, and larger snow removal fleets.
Sectional cutting edges
3′ and 4′ sections may be quoted where the plow mounting arrangement supports a sectional replacement.
Shown dimensions represent common requests, not a guarantee that every thickness, height, length, and hole-pattern combination is stocked or available.
Steel edge specifications.
A practical guide to the sizes we commonly quote. Final material, dimensions, and punching are confirmed for each order.
Common cutting edge dimensions
| Material | 1084 high-carbon steel |
|---|---|
| Thickness | 3/8″, 1/2″, 5/8″, 3/4″ |
| Blade height | 6″ and 8″ |
| Common lengths | 90″, 96″, 102″, 108″, 120″, 132″ |
| Highway lengths | 108″, 120″, 132″, 144″ (9′–12′) |
| Hole layout | Standard replacement patterns, highway patterns, or a supplied drawing |
| Punch position | Center punch or top punch, as specified |
Built around your specifications.
Buying replacement edges shouldn't mean changing your plow to fit a generic blade. Send the dimensions, existing part reference, or hole layout and we'll review the cutting and punching required.
Highway & municipal cutting edges.
For highway plows, we quote common 9′, 10′, 11′, and 12′ overall lengths, including specified 3-3-12 highway-style layouts and 5/8″ bolt applications.
| Overall length | Length (in.) | Holes* |
|---|---|---|
| 9′ | 108″ | 11 |
| 10′ | 120″ | 12 |
| 11′ | 132″ | 13 |
| 12′ | 144″ | 14 |
*Hole counts apply to the referenced highway layout, not to every blade of a given length. Confirm the complete drawing, hole diameter, and position before ordering. Bolt diameter and finished hole diameter are not the same.
Get the bolt pattern right.
A blade's length is only one part of the fit. These are the measurements that help us match a replacement or quote a specified hole pattern.
Measurements that matter
- Overall size: thickness × blade height × finished length.
- Mounting holes: quantity, finished diameter or slot size, and hole shape.
- Horizontal layout: center-to-center spacing and end-to-first-hole offsets.
- Vertical layout: top-to-hole-center distance or center-punch position.
- Identification: equipment make/model, part number, drawing, or a photo of the existing blade.
For custom drawings, include the drawing number and revision. Additional edge profiles or finishes are reviewed separately.
We produce the edge—not just resell it.
Our Oneonta shop cuts, shears, and punches steel cutting edges. Keeping this work in-house helps us serve repeat wholesale orders and respond to the dimensions and mounting patterns our customers need, without treating every variation as a special project.
Process edge stock to the specified finished length.
Use the specified spacing, diameter, offsets, and punch position.
Support dealers, distributors, and fleet buyers with defined replacement specifications.
Need cutting edges? Let's quote your list.
Send your sizes and quantities, or an existing part number or drawing. We can review the configuration and prepare pricing for your replacement cutting-edge requirements.
Don't have every measurement? Start with the equipment model or a photo of the old edge.
- Thickness, height, and finished length
- Quantity of each size
- Hole pattern, drawing, or OEM part reference
- Center punch or top punch where relevant
- Delivery ZIP code
Cutting edge ordering questions.
Are all sizes shown available in every thickness?
No. The listed dimensions illustrate common order requests. We confirm material, size combinations, and manufacturing availability when quoting your specific order.
Can you match the holes on an existing plow blade?
We can review an existing part number, clear measurements, or a hole-center drawing and quote the required punching. A photo can help identify the pattern, but production requires confirmed dimensions.
Do you supply highway departments and wholesale dealers?
Yes. East End Steel supplies replacement cutting edges for dealers, distributors, municipalities, highway departments, and commercial fleets. Contact us with a parts list for wholesale pricing.
Do you offer rubber or carbide cutting edges too?
We also handle inquiries for rubber snowplow edges and carbide cutting edges. These are separate product types with different material and mounting requirements; contact us for the relevant product specifications.